Brewer Oil Company is looking for a CDL Truck Driver in Artesia, NM. This position is responsible for the transport of hazardous petroleum fuel materials to customers and for providing exceptional customer service.
PC-11 or Proposed Category 11 is the working title for the new API category of heavy duty engine oils in development to be available December 1, 2016. The next generation of heavy duty engine oils will surpass the performance of the current category of heavy duty engine oils. API-CJ4— offering better fuel economy along with superb engine protection against wear, oxidation and deposit buildup.
Did you know that up to 20% of diesel engine failures or causes of engine downtime are related to coolant or cooling system failures? Extended Life Coolants (ELCs) have been specially designed to deliver better protection in heavy-duty on-highway diesel engines than traditional coolants at a lower overall cost. The inhibitors in ELCs help maximize heat transfer and help protect metal surfaces against corrosion in the cooling system.
Using the correct ELC, along with recommended coolant maintenance practices, can help avoid many cooling system problems and achieve optimum performance levels. There are several types of Heavy Duty ELCs that a user can select to help ensure superb engine cooling system protection:
- Extended Life Coolant with Nitrite (Ethylene Glycol based): First developed in the mid-1990s and introduced by Caterpillar for all their engines as factory fill, this is the most common Heavy Duty ELC found in the market in both trucks and off-highway equipment.
- Extended Life Coolant – Nitrite Free (Ethylene Glycol based): These have been more commonly associated with European Heavy Duty trucks, but their use is expanding in North America by OEMs that have European-based ownership. They provide good protection, but don’t provide liner protection equivalent to that of ELC with nitrites.
- Extended Life Coolants (Propylene Glycol Based): These are formulated the same as the above coolants but have a non-toxic propylene glycol base. Crucially, these can be used in operations where there are environmental concerns or where contact with humans or animals is possible.
- Extended Life Corrosion Inhibitor (Water Based): These provide the best heat transfer performance and the full benefits of ELC performance when freezing temperatures are not an issue. These are mainly found in warmer climates or in marine applications where the engines are not exposed directly to freezing weather.
Read a more detailed version of this article in Chevron Lube Matters.
Most fleets and owner operators tend to focus on their engine oil and other fluid performance intervals, but neglect their coolant maintenance. They only focus on keeping the coolant system full (or topped off). This neglect has led to OEMs reporting that more than 20% of diesel engine failures are linked to coolant system issues or poor coolant maintenance.
The good news is that you can take some basic steps for better coolant maintenance. Before checking the system, make sure it is safe to do so by allowing the engine to cool to at least 100° F. Remove the radiator or coolant overflow tank cap carefully, with a rag covering the cap and proper eye and face protection.
Check the coolant system each time the vehicle comes in for an oil change, and record all results:
- Inspect the hoses, clamps and conduits for abrasion, wear and corrosion.
- Take a coolant sample with a small, clear bottle from the top of the radiator or by draining some at the bottom of the radiator.
- Inspect the coolant to make sure it is free of haze, debris and oil. Check the smell; any foul odors may indicate damage.
- Use test strips to check for inhibitor strength, the pH, and nitrite or Supplemental Coolant Additives (SCA) levels, as required by the type of coolant in use.
- Add SCAs as necessary or change the filter that adds them, as applicable.
- Check the freeze point with a refractometer. You can also check this using an appropriate test strip, such as the Chevron FleetFix Dilution Test for Delo® Extended Life Coolant.
Chevron has developed a new system called Kool Tools to help you implement a best-in-class coolant maintenance program. Contact us to find out how to get your own Chevron Kool Tools Kit.
Read a more detailed version of this article in Delo Lube Matters.
The Chase Foundation was established in 2006 by Mack and Marilyn Chase to help serve the community of Artesia and the not for profit organizations within Southeastern New Mexico.
Chase ScholarsThe Chase Foundation pursues this vision through positive community initiatives, resources, and the collaborative efforts of partnering organizations. The foundation invests in lasting change to improve the lives of our fellow citizens and the future of our communities. The foundation is deeply committed to the importance of partnerships and community participation to strengthen the success of the program. Most of all the Chase Family is convinced that each of us can make a difference in shaping lives in a positive way through community involvement, quality education programs and the desire to build strong communities through innovative approaches.
Visit the Chase Foundation Website and learn more.
Source : Cummins Filtration[/one_fourth]
SCR: The Leading Technology to Meet 2010 Emission Regulations
[panel title=”Q. What is Selective Catalytic Reduction (SCR)?”]A. SCR is a technology that uses a urea based diesel exhaust fluid (DEF) and a catalytic converter to significantly reduce oxides of nitrogen (NOx) emissions. SCR is the leading technology being used to meet 2010 emission regulations.[/panel]
[panel title=”Q. How does an SCR system work?”]A. The purpose of the SCR system is to reduce levels of NOx (oxides of nitrogen emitted from engines) that are harmful to our health and the environment. SCR is the aftertreatment technology that treats exhaust gas downstream of the engine. Small quantities of diesel exhaust fluid (DEF) are injected into the exhaust upstream of a catalyst, where it vaporizes and decomposes to form ammonia and carbon dioxide. The ammonia (NH3) is the desired product which in conjunction to the SCR catalyst, converts the NOx to harmless nitrogen (N2) and water (H2O).
[panel title=”Q. What are the advantages for the fleet in using SCR technology?”]A. Cummins 2010 engines will deliver what customers need in these challenging economic times. Cummins 2010 heavy duty engines utilizing SCR will provide substantial fuel economy improvement, up to 5%. SCR catalyst technology allows much greater NOx conversion efficiency, thereby allowing the engine to be fully optimized, which contributes to this fuel economy improvement. Another benefit to the improved fuel consumption is less frequent Diesel Particulate Filter (DPF) cleanout, thereby further reducing costs.[/panel]
[panel title=”Q. What experience does Cummins have with SCR systems?”]A. SCR technology is not new to Cummins. In 2006, Cummins launched its midrange engine certified to the Euro 4 standard using SCR for commercial vehicle applications in Europe. Cummins has built and shipped over 50,000 SCR engines to date. Cummins Emission Solutions has built and shipped over 250,000 SCR systems. Cummins Filtration has provided DEF, previously marketed under the Stableguard name, to the stationary market for over 5 years.[/panel]
DEF: Properties & Handling Guidelines
[panel title=”Q. What is Diesel Exhaust Fluid (DEF)?”]A. DEF is the reactant necessary for the functionality of the SCR system. It is a carefully blended aqueous urea solution of 32.5% high purity urea and 67.5% deionized water.[/panel]
[panel title=”Q. What is urea?”]A. Urea is a compound of nitrogen that turns to ammonia when heated. It is used in a variety of industries, including as a fertilizer in agriculture.[/panel]
[panel title=”Q. How will I know that the DEF product I purchase will work?”]A. The DEF you purchase should state and display the certification of the American Petroleum Institute (API), German Institute of Standardization DIN70700, the International Organization for Standardization ISO 22241-1, and meet AUS – 32 specifications. This will ensure the proper purity and concentration (32.5%) of urea. For more information on these specifications, visit www.iso.org.[/panel]
[panel title=”Q. Can I make DEF myself?”]A. Cummins Filtration does not recommend customers make DEF themselves. DEF has strict requirements for maintaining concentration and purity of ingredients that is critical to the proper functioning and longevity of the SCR system. Cummins and other OEMs require that DEF used with their SCR systems meet all ISO22241 specifications as well as API certification requirements. It is recommended that end users purchase certified DEF and avoid blending it themselves. For more information about the quality standards, refer to ISO22241 which details specifications for DEF quality, handling, testing, transportation storage, and refilling.[/panel]
[panel title=”Q. What is API Certification?”]A. API Certification is a voluntary program established by the American Petroleum Institute (API) which certifies and monitors that diesel exhaust fluid meets ISO specifications. The program was launched in March 2009. Cummins Filtration DEF currently meets ISO specification and is also API certified.[/panel]
[panel title=”Q. Is the 32.5% urea solution critical?”]A. Yes, The 32.5% urea concentration is the ideal solution as it provides the lowest freeze point. Also, SCR systems will be calibrated to the 32.5%, so that optimum NOx will be reduced during operation.[/panel]
[panel title=”Q. What is the freeze point of DEF?”]A. A 32.5% solution of DEF will begin to crystallize and freeze at 12 deg F (-11 deg C). At 32.5%, both the urea and water will freeze at the same rate, ensuring that as it thaws, the fluid does not become diluted, or over concentrated. The freezing and unthawing of DEF will not cause degradation of the product.[/panel]
[panel title=”Q. Does DEF expand when frozen?”]A. Yes, DEF expands by approximately 7% when frozen. DEF packaging and tanks are designed to allow for expansion.[/panel]
[panel title=”Q. How much does DEF weigh?”]A. DEF weighs approximately 9 pounds per gallon.[/panel]
[panel title=”Q. How do I keep the DEF from freezing? What happens if the DEF freezes in the tank on the vehicle?”]A. During vehicle operation, SCR systems are designed to provide heating for the DEF tank and supply lines. If DEF freezes when the vehicle is shut down, start up and normal operation of the vehicle will not be inhibited. The SCR heating system is designed to quickly return the DEF to liquid form and the operation of the vehicle will not be impacted. The freezing and unthawing of DEF will not cause degradation of the product.[/panel]
[panel title=”Q. Can an anti-gelling or freeze point improver be added to the DEF to prevent it from freezing?”]A. No. While an additive could improve freeze point of the mixture, the 32.5% solution is very specific to providing NOx reducing properties. Any further blending or adjusting of the DEF mixture will impede its ability to perform correctly and may cause damage to the SCR components. Additives of any type are not approved for use in DEF today. If the ISO standards should change to allow antifreeze additives, Cummins Filtration will ensure our product continues to meet ISO requirements.[/panel]
[panel title=”Q. Are there special storage requirements for DEF?”]A. DEF should be stored in a cool, dry, well-ventilated area, out of direct sunlight. While the optimum storage temperature is up to 77 deg F (25 deg C), temporary exposure to higher temperatures has little to no impact on the quality of DEF.[/panel]
[panel title=”Q. What is the shelf life of DEF?”]A. The shelf life of DEF is a function of ambient storage temperature. DEF will degrade over time depending on temperature and exposure to sun light. Expectations for shelf life as defined by ISO Spec 22241-3 are the minimum expectations for shelf life when stored at constant temperatures. If stored between 10 and 90 deg F, shelf life will easily be one year. If the maximum temperature does not exceed approximately 75 deg F for an extended period of time, the shelf life will be two years.[/panel]
[panel title=”Q. How can I determine when the DEF I have purchased was manufactured?”]A. All DEF packages will have a date code located somewhere on the product. The date code will allow you determine the date the DEF was made. 1 gallon containers will have a laser code imprinted on the bottle. 2.5 and 5 gallon containers have a small date code label applied to the bottle. Drum and totes will have a label applied to either the top or side of the product.
The first digit of the date code represents the DEF batch number and the next 6 digits reflect the date that the batch was filled.
[panel title=”Q. What impact will exposure to high temperatures for an extended period of time have on DEF?”]A. While DEF exposure to constant, high storage temperature may have some impact on shelf life, this should not concern operators. Extensive testing in very hot climates has been conducted confirming that DEF stored at a constant temperature of 95 deg F had a shelf life of over 6 months.[/panel]
[panel title=”Q. Should I be concerned about handling DEF?”]A. No. DEF is a nontoxic, nonpolluting, non-hazardous and nonflammable solution. It is stable, colorless, and meets accepted international standards for purity and composition. DEF is safe to handle and store and poses no serious risk to humans, animals, equipment or the environment when handled properly. MSDS sheets are currently available on cumminsfiltration.com.[/panel]
[panel title=”Q. What should I do if I spill DEF?”]A. If DEF is spilled, contain the spilled liquid and absorb it with an inert, non-combustible absorbent material, such as sand. Shovel the material into a suitable container for disposal. Spills into a drain should be avoided. If spilled into a drain, flush thoroughly with water. For significant quantities, contact local authorities for proper disposal procedures. If DEF is spilled on your vehicle, rinse with water.[/panel]
[panel title=”Q. What happens if I ingest DEF?”]A. DEF should never be ingested. If it is ingested, do not induce vomiting. A physician should be consulted if you begin experience any symptoms.[/panel]
[panel title=”Q. What happens if I inhale DEF?”]A. While pumping DEF will not cause significant exposure, inhalation may occur if exposed to DEF in a closed area and/ of if DEF is misted into the air. Under normal conditions of use, harmful effects are not expected.
If you inhale DEF, you should move to an area with fresh air and obtain medical attention if symptoms, such as irritation to nose and throat, develop or persist.[/panel]
[panel title=”Q. Does DEF smell?”]A. DEF may have a slightly pungent odor similar to that of ammonia, however it is completely harmless.[/panel]
[panel title=”Q. Is DEF corrosive?”]A. DEF is corrosive to copper and brass as well as other materials. Only approved materials, such as high density polyethylene (HDPE), will be used in the DEF tank, packaging and dispensing equipment.[/panel]
[panel title=”Q. Will DEF evaporate and what happens if it does?”]A. Because DEF is comprised of 67.5% water, evaporation will occur over time. However, Cummins has built and shipped over 50,000 SCR equipped engines and Cummins Emissions Solutions has built and shipped over 250,000 SCR systems. These SCR engines and systems are operating throughout Europe, including the warmer climates of Spain, Greece and even into the Middle East with no problems associated with evaporation. In addition, our field test vehicles across the US in high temperature locations have not yielded any significant amounts of evaporation that would impede engine performance or operation. As a preventative measure, it is important to keep the cap of the DEF tank and storage containers securely closed. If the urea concentration does become more or less than recommended over time, the DEF tank should be drained. Cummins Filtration will offer equipment to test the urea concentration of DEF.[/panel]
[panel title=”Q. What measures have been put in place to prevent diesel from being pumped into the DEF tank?”]A. The standard nozzle diameter for dispensing DEF has been designed at 19mm versus the standard diesel fuel nozzle diameter which is 22mm. In addition, the tank cap for the DEF tank will be blue to further differentiation from the diesel tank.[/panel]
[panel title=”Q. What happens if a non-DEF substance is accidentally entered into the DEF tank?”]A. The SCR system will recognize solutions other than DEF, and the DEF indicator light will appear notifying the driver. Depending on the level of contamination in the tank, the vehicle may require servicing.[/panel]
[panel title=”Q. How much DEF will a truck consume?”]A. DEF consumption is expected to be approximately 2% of fuel consumption, depending on vehicle operation, duty cycle, geography, load ratings, etc.[/panel]
[panel title=”Q. What is the number of miles a truck can expect to travel on one gallon of DEF?”]A. DEF consumption is directly related to fuel consumption. A truck averaging 6 MPG can expect to go approximately 300 miles on one gallon of DEF.[/panel]
[panel title=”Q. How can an operator determine how much DEF they will need/use?”]A. DEF consumption will be approximately 2% of the diesel fuel consumed. Another way to consider it is that DEF will be consumed on a 50 to 1 ratio with diesel. (For every 50 gallons of diesel fuel burned, you will use 1 gallon of DEF). If you know the average fuel consumption of a vehicle, you can easily calculate the amount of DEF that will be used.
Annual miles for average truck = 50,000 miles
MPG for average truck = 8 mpg
50,000 miles / 8 mpg = 6,250 gallons diesel fuel per year
DEF usage @ 2% of fuel consumption = 125 gallons of DEF / year
125 gallons / 10 gallon tank (average size) = 13 DEF fill-ups / year
[panel title=”Q. Is the DEF dose rate the same for all engine manufacturers?”]A. The DEF dose rate will vary slightly amongst engine manufacturers. While most engines will have a dose rate of 2% of diesel fuel consumed, the dose rate will range from 1% to 3%.[/panel]
[panel title=”Q. What happens if the vehicle runs out of DEF?”]A. Vehicles that use DEF will have indicators on the dash that will alert the driver of the quantity of DEF on board. A gauge similar to a fuel gauge will indicate the level of DEF. There will be a DEF low level warning lamp that will illuminate when DEF is low. If the vehicle is operated such that one would run completely out of DEF, vehicle power will be reduced enough to encourage the operator to refill the DEF tank. Once the tank has been refilled the engine will resume normal power levels.[/panel]
[panel title=”Q. Is any maintenance required on the DEF Dosing Unit Filter?”]A. The DEF Dosing Unit Filter will need to be replaced about every 200k miles as part of routine maintenance.[/panel]
[panel title=”Q. Will Cummins Filtration supply the DEF Dosing Unit Filter?”]A. The DEF Dosing Unit Filter is part of the DEF dosing system and will be available[/panel]
[panel title=”Q. On SCR equipped vehicles, what changes will be expected for lube filter service intervals?”]A. There will be no changes to the lube filter service intervals on SCR equipped vehicles. The SCR process impacts the exhaust emissions after they are produced by the engine.[/panel]
DEF Product Options & Availability
[panel title=”Q. What package sizes will be available? When?”]A. Cummins Filtration has offered DEF since 2003 in 4 sizes: 55 gal drum, 275 gal disposable tote, 330 gal tote, and bulk. Cummins Filtration recently expanded their DEF product line to include smaller packaging options, including 1, 2.5, and 5 gallon containers.[/panel]
[panel title=”Q. Can I fill my own bottles of DEF?”]A. Cummins Filtration does not recommend that customers fill bottles of DEF for use in SCR systems due to the strict ISO requirements for maintaining DEF purity (free of contamination). For customers that do require filling, the ISO 22241 specifications provide detailed information regarding DEF quality, handling, testing, transportation storage, and refilling.[/panel]
[panel title=”Q. What does IBC stand for?”]A. Intermediate Bulk Containers (IBC) are all containers larger than a 55 gallon (207L) drums, and smaller than a tanker.[/panel]
[panel title=”Q. Can totes be returned and refilled after use?”]
A. The 330 gallon tote is a returnable tote. Empty tote returns should be made to the tote vendor rather than Cummins Filtration. For information on returning totes, please call 1- 800-608-8587.
The 275 gallon tote is disposable and primarily used for refilling of the larger plastic refillable tote. However, if customers do utilize the 275 gallon tote the transfer equipment must be DEF compatible and completely free of contaminants. Stainless steel and high density polyethylene plastic are DEF compatible materials. For a complete list of DEF compatible materials, see ISO22241. If required, the DEF dispensing equipment can be utilized with the 275 gallon tote when the dispensing equipment is supported by an appropriate structure.
[panel title=”Q. Where will DEF be available?”]A. In North America, all major truck stops have committed to carrying and selling DEF. The initial supply of DEF will most likely be in packaged containers while bulk dispensing options are being installed. In addition, Cummins Filtration is making DEF available to thousands of distributors, dealers and other outlets.[/panel]
[panel title=”Q. Will Cummins Filtration offer dispensing options?”]A. Cummins Filtration currently offers several dispensing equipment options, including electric and air operated pumps for use with drums, totes as well as a flow meter. For more information, see our dispensing kits brochure (LT36135) available on cumminsfiltration.com.[/panel]
[panel title=”Q. Will Cummins Filtration offer equipment to test the urea concentration of DEF?”]A. For several years, Cummins Filtration has offered field testing tools for coolant products. Similar products will be made available for DEF.[/panel]
[panel title=”Q. What price can be expected for DEF?”]A. Current pricing for DEF centers on ‘niche’ markets which itself drives very low volume usage and premium pricing. This is not a realistic indication of where the industry will be in 1 year, or even 6 months. We agree with current predictions that at the pump DEF pricing will be at or below the price of diesel fuel and is forecasted to be in the $2 – $3 range.[/panel]
[panel title=”Q. Is there an Environmental Hazardous Charge (EHC) that applies to DEF shipments received in Ontario?”]
A. There is no EHC applied to DEF at this time.
To find your nearest retailer of Fleetguard products, visit cumminsfiltration.com/wrl.
Cummins only uses Valvoline Premium Blue, so why shouldn’t you? Watch as Cummins outlines the reasons they fully endorse the use of Valvoline Oil in all of their products. Valvoline and Cummins have worked together to develop the perfect product for over a decade. Valvoline and Cummins continue to be the number one combination!
[video_embed]<iframe width=”560″ height=”315″ src=”//www.youtube.com/embed/-ROXQD8Sk2w” frameborder=”0″ allowfullscreen></iframe>[/video_embed]
- [Now Hiring] CDL Truck Driver – Artesia, NMJanuary 30, 2018 - 1:31 pm
Brewer Oil Company is looking for a CDL Truck Driver in Artesia, NM. This position is responsible for the transport of hazardous petroleum fuel materials to customers and for providing exceptional customer service.
- When the going gets tough…January 9, 2017 - 4:43 pm
2701 Candelaria Rd NE